High quality, internally braided rubber engine water heater hose which is used on various engine water cooling systems on WaterMota engines.
This product is not currently available, we hope to have it available soon.
This product has been discontinued.
Engine Water Cooling Hose is a high quality, internally braided rubber engine water heater hose which is used on various engine water cooling systems. The heater hose has a synthetic textile braided reinforcement and is heat, weather and ozone resistant.
The WaterMota Pipe Connector is usually used on WaterMota petrol engine water cooling systems inlets and outlets for connecting 1/2" (13mm) heater hose. Some early WaterMota Pre-Crossflow engines have 3/8" (10mm) cooling hose. Some WaterMota engines feature copper pipe connected to the WaterMota Pipe Connector with WaterMota Water Pump to Manifold Hose Kit.
| Our Part No. | JB065 | JB065A | JB065AA | JB065B | JB065C |
| Price | £6.81 | £3.90 | £4.53 | £6.40 | £11.10 |
| Colour | Black |
Black |
Black |
Black |
Black |
| Internal Diameter | 10mm (3/8") | 13mm (1/2") | 10mm (3/8") | 19mm (3/4") | 25mm (1") |
| Diameter | 17mm | 20mm | 23mm | 28mm | 34mm |
| Material | Rubber | Rubber | Rubber | Rubber | Rubber |
| Reinforced | |||||
| Working Pressure | 145psi | 145psi | 145psi | 145psi | 145psi |
| Burst Pressure | 435psi | 435psi | 435psi | 435psi | 435psi |
| Minimum Bend Radius | 100mm | 130mm | 160mm | 190mm | 250mm |
| Minimum Temperature | -45°C | -45°C | -45°C | -45°C | -45°C |
| Maximum Temperature | 120°C | 120°C | 120°C | 120°C | 120°C |
Materials from the Reel, once cut to a bespoke length, cannot be returned.
