A mains adaptor for connecting 24 volt Dometic cooling appliances to UK mains power (three-pin plug) with a 'mains priority' circuit that intelligently switches from 12/24v power to mains power.
A mains adaptor for connecting 24 volt Dometic cooling appliances to UK mains power (three-pin plug) with a 'mains priority' circuit that intelligently switches from 12/24v power to mains power when available.
This Dometic power adaptor allows you to have your fridge connected to the onboard 12/24 volt system and a mains system. When the mains system is identified the power rectifier can operate coolers and refrigerators with BD35F compressors at 180-240 volts. The intelligent chip inside understands when mains power is and is not available. When no mains input is recognised the power adaptor will revert to the 12/24 volt power input to run the fridge or cooler.
The Dometic EPS100 can be installed onto your Dometic cooler using the output wires which have spade connectors on. There is a 230 volt UK plug (UK three pin plug) for the inlet mains power and two pre-stripped wires are available for connecting to the 12/24 volt input.
There is no need to manually switch between power inputs as the rectify will analyse the available power and automatically select the mains power over the 12/24 volt input.
This Dometic adaptor comes complete with a fastening bracket and screws.
| Width | 115mm |
| Height | 65mm |
| Depth | 185mm |
| Rated Input Voltage (Battery) | 230v~, 50Hz (12/24v) |
| Input Voltage Range | 180-264v~ |
| Input Current (Battery) | 1.2A (max. 10A for 0.3 secs) |
| Rated Output Voltage (Battery) | 25v (12/24v) |
| Idle Output Voltage | 29v |
| Rated Output Current (Battery) | 3A (max. 10A) |
| Peak Output Current (for 0.3 seconds) | 10A |
| Constant Output Power | 100W |
| Operating Temperature Range | 0°C to +40°C |
| Fuse (not included) | 10A |
| Weight | 700g |
