The WaterMota New Style Water Pump Seal is a water pump lip seal. The lip seals sit around the shaft inside the pump body to stop water leaking into your oil and oil leaking into your water.
This seal is suitable for the new style replacement WaterMota Pre-Crossflow engine water pumps and WaterMota Crossflow engine water pumps, Watermota Jabsco 29300-2601C, 29300-2801C and 29470-2231C engine cooling water pumps. These pumps are modern replacements of the original water pumps fitted to both the WaterMota Pre-Crossflow Engines and the WaterMota Crossflow Engines.
Two seals are usually required when servicing these water pumps, there is one seal just behind the impeller and one seal just behind the bearings.
On the WaterMota Jabsco 29300-2601C, the front seal can be accessed behind the wear plate which is situated behind the impeller. The back seal can be accessed by removing the rear bearings.
On the WaterMota Jabsco 29300-2801C & 29470-2231C, both the front and the back seals can be accessed by removing the rear bearings.
The WaterMota New Style Water Pump Seal is suitable for both the WaterMota Pre-Crossflow and WaterMota Crossflow petrol engines including the WaterMota Sea Wolf Mk1, WaterMota Sea Wolf Mk2, WaterMota Sea Tiger Mk1 and WaterMota Sea Tiger Mk2 which have had a new water pump fitted.
Compatible with | WaterMota Sea Wolf Mk1, WaterMota Sea Tiger Mk1, WaterMota Sea Wolf Mk2, WaterMota Sea Tiger Mk2 |
Engine Type | Pre-Crossflow & Crossflow |
Equivalent Part No. | Jabsco SP2701-1006, Jabsco SP2701-1006B |