Water pump repair kit for the Watermota Pre-Crossflow engine including the rubber impeller, seals, the O ring, gaskets and face plate screws.
It is advisable to carry a spare water pump impeller as they can go at any time. Luckily it's a relatively easy job to replace, as long as you have a spare!
The WaterMota water pump service kit is a general service kit for the WaterMota pre-crossflow engine water pump, it contains the parts needed for a 'standard' service, these are the parts that generally wear out and are usually an annual service item.
This water pump service kit is commonly found on Freeman 22 Mk1's, Freeman 22 Mk2's and Freeman 26's fitted with WaterMota Pre-Crossflow engines (either The Sea Wolf or Sea Tiger). The water pump is bolted to the engine and is driven directly from the engine camshaft.
Early Freeman 25's and Freeman 26's with a Parsons engine usually have a belt driven water pump which requires a different service kit.
The WaterMota Crossflow Water Pump Service Kit is suitable for the majority of WaterMota Crossflow petrol engines with an engine driven water pump; including the WaterMota Sea Wolf Mk1 and WaterMota Sea Tiger Mk1.
It is advisable to carry a spare water pump impeller as they can go at any time. Luckily it's a relatively easy job to replace, as long as you have a spare!
| Compatible with | WaterMota Sea Wolf Mk1, WaterMota Sea Tiger Mk1 |
| Engine Type | Pre-Crossflow |
The water pump shown above is the most common pump for this engine setup (pump not included in service kit). Occasionally a slightly different water pump service kit maybe required if a different water pump is fitted. If you are unsure please contact us as these are usually available separately.
