Economy brass hinge with three counter sunk fixing holes on each hinge leaf.
These economy brass hinges are extruded from brass with a brass pin running through the knuckle. Each economy brass hinge features three counter sunk fixing holes on each hinge leaf.
The brass hinges have an 'uncranked' knuckle design with tapered leafs (this is the most common type) and are ideally suited for boat cupboard doors and covers. The brass pin is a 'secured in the knuckle' type which runs within the hinge knuckle and finishes flush at the top and bottom of the hinge.
| FF400A | FF400A/A | FF400B | FF400C | FF400D | FF400E | |
| Length | 38mm (1 1/2") | 38mm (1 1/2") | 51mm (2") | 63mm (2 1/2") | 76mm (3") | 100mm (4") |
| Width | 22mm (7/8") | 24mm (15/16") | 29mm (1 1/8") | 35mm (1 3/8") | 41mm (1 5/8") | 60mm (2 3/8") |
| Fixing Hole Centres | 13mm | 23mm | 20mm | 24mm | 30mm | 29mm |
| Screw Guage | Size 4 | Size 4 | Size 4 | Size 6 | Size 8 | Size 10 |
| Quantity | 1 | 1 | 1 | 1 | 1 | 1 |
Measurements shown are open hinge sizes.
