Marine grade extendable pantograph wiper arm with 'wide slide clip' wiper blade connection for keeping a wiper blade upright and parallel with the screen.
This marine grade, durable, stainless steel pantograph windscreen wiper arms can be extended to take different length wiper blades and can be fitted to wiper motors with a shaft diameter of approximately 14mm. Constructed with stainless steel components they are designed to withstand harsh weather and saltwater.
The pantograph wiper arm features a double wiper arm formation to keep a wiper blade upright and running parallel with the windscreen for increased screen coverage. This boat pantograph wiper arm comes complete with the fixing bar and spindle which supports the idle pivot wiper arm.
They are designed to accept wiper blades with a female 'slide clip' connection of approximately 7mm. The male 'slide clip' connection on this wiper arm is approximately 7mm wide. The pantograph wiper arms can be pulled away from the windscreen and will stay in place which is useful for cleaning the window or for replacing wiper blades whilst the arm is in location - much like car wiper arms.
| DF1014 | DF1014A | DF1014B | |
| Length (min-max) | 305mm to 360mm | 381mm to 432mm | 432mm to 560mm |
| Wiper Motor Shaft Diameter | 14mm | ||
| Wiper Arm Male Slide Clip Width | 7mm | ||
| Suitable Wiper Blade Lengths | 12" to 14" (305mm to 360mm) | 16" to 17" (406mm to 432mm) | 17" to 22" (432mm to 560mm) |
It is recommended that when using a pantograph arm the wiper motor sweep should not exceed 90°.
