Jabsco Accumulator Tanks
  • Jabsco Accumulator Tanks
  • Jabsco Accumulator Tank - 0.6L
  • Jabsco Accumulator Tank - 0.6L
  • Jabsco Accumulator Tank - 0.6L Mounting Feet
  • Jabsco Accumulator Tank - 1L
  • Jabsco Accumulator Tank - 1L Rear Fixing Mounts

Jabsco Accumulator Tanks

An inline fresh water accumulator tank for small pressurised boat water systems, the tank smooths the water flow from your taps and help reduce wear on your water pump.

Jabsco Logo

Add to your basket...

Jabsco Accumulator Tank - 0.6L (WA264)

By: Jabsco, Part No.: 30573-0003
You save:
£4.61 (10%)

Jabsco Accumulator Tank - 1L (WA265)

By: Jabsco, Part No.: 30573-0000
You save:
£11.12 (11%)

Jabsco Accumulator Tanks Information

The Jabsco Accumulator Tanks can be used is light pressurised water systems to smooth out water flow and make it more even, reduce wear on your water pump and make the water system more quieter.

The rubber membrane within the tank expands and contracts depending on the air pressure inside the accumulator tank. This regulates the amount of water which can be stored in the tank depending on your boat water pumps cut-in pressure.

It is a good idea to fit an accumulator tank to your boats water system if you are using a pressure water pump. The tank can be fitted in any orientation just after the pump. These accumulator tanks are designed for small sized water systems on small sized boats. If in doubt it is better to fit a larger accumulator tank.

What is an Accumulator Tank

Accumulator tanks act as a buffer, smoothing the flow of water from the water pump to the tap. The tank keeps a reservoir of water which helps ease the strain on the pump. With an accumulator tank the pump doesn't need to start immediately and doesn't rapidly cycle on and off meaning you get a much smoother flow of water and reduce wear on the pump at the same time. This accumulator tank can be used on cold water systems.

  • Smoother water flow from your tap (the water no longer pulsates)
  • Reduce wear on your pump
  • Reduce battery usage as the pump doesn't turn on as frequently
  • Quieter water system operation

The Jabsco accumulator tanks have a mounitng point for optional pressure switch.

Jabsco Accumulator Tanks Specification

  WA264 WA265
Capacity 0.65L 1L
Connection 1/2" BSP or 1/2" Hosetail 1/2" BSP or 1/2" Hoestail
Maximum Recommended Working Pressure 125 Psi (8.6 Bar) 125 Psi (8.6 Bar)
Height 214mm 337mm
Width 119mm 119mm
Depth 110mm 110mm
Weight 440g 700g

Included in the Jabsco Accumulator Tanks

  • Accumulator Tank
  • 1/2" BSP Connector (2)
  • 1/2" Hosetail Connector (2)

You may also like...

Explore similar items...

CIMM Accumulator Expansion Tanks
from £29.95
Save: £1.36 (4%)