Stainless Steel LED Navigation Lights
Stainless steel 12 or 24 volt, RINA tested, LED boat navigation light for mounting on vertical surfaces for vessels up to 12m in length.
Add to your basket...
Stainless Steel LED Navigation Lights Information
Our thoughts...
These navigation lights have been type-tested (No. ELE112414CS) by the Royal Institute of Naval Architects (RINA); an international recognition of quality marine design and manufacture and NMMA certified for vessels up to 12m.
These AISI 316 Stainless steel 12 or 24 volt, RINA tested, LED boat navigation light are for mounting on vertical surfaces for vessels up to 12m (approximately 39ft) in length.
These LED boat navigation lights can be installed using the four concealed fixing holes that secure the base of the light to the boat. The front casing can be detached (by unscrewing the locating screws in the front) from the light base for bulb replacement meaning you do not need to take the whole light fitting off.
The electrical connection has two spade connectors positioned within a weather resistant foam washer on the base of the light to help prevent water ingress and subsequent wear and tear.
Stainless Steel LED Navigation Lights Specification
LF470A | LF470B | LF470C | |
Light Colour | Port (Red) | Starboard (Green) | Stern (White) |
Light Angle | 112.5° | 112.5° | 135° |
Casing | AISI 316 Stainless Steel | ||
Voltage | 12v | ||
Height | 62mm | ||
Width | 72mm | ||
Depth | 45mm | ||
Wattage | 0.8w |