Boat Calorifier Pre-Wired Immersion Heaters
Corrosion resistant calorifier pre-wired immersion heaters with built-in dual thermostat and safety cut-off for heating water in a boat calorifier tank.
Add to your basket...
Boat Calorifier Pre-Wired Immersion Heaters Information
Corrosion resistant calorifier pre-wired immersion heaters with built-in dual thermostat and safety cut-off for heating water in a boat calorifier tank.
These compact boat calorifer immersion heaters are manufactured using Nicalloy for a corrosion resistant finish, have a 2 1/4" BSP fitting, are available in either 0.75Kw, 1.25Kw, 2Kw or 3Kw elements and feature a dual thermostat system, a safety cut-off and large hexagon bezel to aid installation. This boat immersion heater element is also pre-wired with 1.2m of wire for easier installation.
With a built-in high temperature cut-out thermostat this boat immersion heater also provides a safety mechanism to help prevent over heating which can be very serious.
Please note: If you are replacing an existing immersion heater, measuring form the base of the thread should give you an approximate measurement of the element length; if you are unsure as to a suitable replacement please contact us.
Boat Calorifier Pre-Wired Immersion Heaters Specifications
WA045A | WA045B | WA045C | WA045D | |
Kilowatt | 0.75Kw | 1.25Kw | 2Kw | 3Kw |
Voltage | 220 - 240v AC | |||
Element Length | 11" | |||
Tread | 2 1/4" BSP | |||
Overall Length | 345mm | |||
Overall Diameter | 90mm |