Ultraflex M58 Light Duty Steering Cables

The Ultraflex M58 is a light duty boat steering cable with a black protective casing, stainless steel steering rod and eye for connection, and 7/8" UNF threaded connection nut.

The steering cable you require for your boat is largely dependent on the type of cable that was already used, it is important to identify the style of the end which fits into the steering helm. If possible look along the cable for a part number which is usually in white towards one end. If you can't find a part number don't the cable you will need to measure it as per the instructions below.

Ultraflex M58 Steering Helm Compatibility

The Ultraflex M58 steering cables feature a threaded notched style helm connection which can be used with nut connections or quick release helms including:

• Ultraflex T67
• Dometic Seastar SH8050

How to measure your boat steering cable?

Firstly remove your old steering cable from your boat, then measure the length of the plastic conduit in cm. Add 56cm to the conduit length then divide the result by 30.5 to convert the measurement into feet. Finally round the number up to the nearest complete foot. This will give you the length of your existing steering cable.

• Measure the length of the plastic conduit in centimetres
• Add 56
• Divide by 30.5
• Round up to the nearest whole number
• Pick the cable length in feet (Ft)

To measure the cable in feet simply measure the plastic conduit in inches, add 18" to the length and round it up to the nearest foot.

• Measure the length of the plastic conduit in inches
• Add 18
• Round up to the nearest whole number
• Pick the cable length in feet (Ft)