Compact surface mount manual bilge pump with easy-grip intergrated pump handle, replacable diaphragm pump design, and a choice of two swivel port connectors for easy installation.
Compact surface mount manual bilge pump with easy-grip intergrated pump handle, replacable diaphragm pump design, and a choice of two swivel port connectors for easy installation.
Ideal for boats with confined space, this low profile manual boat bilge pump can be mounted directly on to a bulkhead and connected into either 1" (25mm) or 1 1/2" (38mm) hose systems for the removal of water from bilges. The two rear ports (one inlet, one outlet) are capable of rotating through 360 degrees to provide full flexibility when linking into existing, or creating new water flow systems.
The low profile intergrated pump-action handle sits no further than 30mm out from the bulkhead when installed (when pressed in) and the high quality Nitrile inlet and outlet valves, and the Santoprene diaphragm, are able to pump water to a maximum head of 3 metres (9.8ft) with a maximum flow rate of 67 litres per minute at 70 strokes a minute (when fitted with 1 1/2" ports).
The Whale Smartbail Service Kit can be used to maintain your Whale Smartbail manual bilge pump to extend the use of the pump for years.
| Handle Width | 215mm |
| Handle Height | 160mm |
| Handle Depth when Pressed In | 30mm |
| Handle Depth when Pulled Out | 200mm |
| Depth Behind Bulkhead | 145mm |
| Height Behind Bulkhead | 140mm |
| Port Sizes | 1" (25mm) or 1 1/2" (38mm) |
| Maximum Head | 3m (9.8ft) |
| Maximum Lift | 3m (9.8ft) |
| Flowrate |
Using 1" Ports:
Using 1 1/2" Ports:
|
