Anchor Marine Ball Fender 30 x 23cm
The Anchor Marine tear drop shaped chubby boat ball fenders are designed to protect your boat where a larger diameter of fender is required, they feature a single re-enforced fixing eye.
Add to your basket...
Anchor Marine Ball Fender 30 x 23cm Information
The Anchor Marine Ball Fenders 30 (12") x 23cm (9") are tear drop shaped chubby boat ball fenders and are designed to give a bigger diameter of protection for a shorter length when compared to standard fenders, they feature a single re-enforced fixing eye.
Inflatable boat fenders are designed to be hung along the side of your boat to offer protection to the boat when mooring alongside other boats, your pontoon or the river bank.
These small Anchor Marine boat ball fenders can be attached to the boat using the reinforced fixing eye at the top of the fender, they can also be used as buoyancy floats or net markers.
Anchor Marine 0151 Ball Fender Inflation
These Anchor Marine boat ball fenders have a 'football' style one way valve fitted as standard which allows air to be pumped into the fender whilst preventing the air from coming out.
These chubby ball fenders can be inflated using a football needle valve adapter as supplied in the Anchor Marine Fender Inflator Kit.
How to inflate the Anchor Marine Boat Fenders
- Remove the black bung which is normally pushed into the valve (it is not uncommon to find this is missing).
- Attach a 'football' style needle valve to an Anchor Marine Quicker Pump, standard bike pump or foot pump.
- Insert the 'football' style needle valve into the fender valve and start pumping.
Anchor Marine Boat Fender Pressure
The official inflation pressure is 0.15 bar at 20 degrees Celsius (or 0.07 bar in hotter climates). The easiest way to tell if your fender is inflated correctly without a pressure gauge is to depress the wall of the fender with your thumb, it should depress approximately 6mm to 8mm.
Spare Anchor Marine valves are available in the Anchor Marine Fender Inflator Kit.
Please be advised that these fenders will usually be posted to you uninflated due to delivery size restrictions. If you are collecting fenders from our shop we will inflate them for you.
Anchor Marine Chubby Fender Part Numbers
These Anchor Marine tear drop shaped ball (chubby) fenders are known as 0151 or A0151 fenders and measure 23cm (9") in diameter by 30cm (12") in length.
Anchor Marine Ball Fender 30 x 23cm Specification
|Length||30cm (12")||30cm (12")||30cm (12")||30cm (12")||30cm (12")|
|Diameter||23cm (9")||23cm (9")||23cm (9")||23cm (9")||23cm (9")|
|Inflation Pressure||0.15 bar at 20°||0.15 bar at 20°C||0.15 bar at 20°C||0.15 bar at 20°C||0.15 bar at 20°C|
|Manufacturers Part No.||0151RB / A0151RB||0151WH / A0151WH||0151BK / A0151BK||0151NY / A0151NY||0151BY / A0151BY|