Stainless Steel Solar Powered Ventilator
Low profile stainless steel solar powered ventilator for boat cabin air circulation for either drawing air inwards or sucking air outwards.
Add to your basket...
Stainless Steel Solar Powered Ventilator Information
Low profile stainless steel solar powered ventilator for boat cabin air circulation for either drawing air inwards or sucking air outwards. Each fan comes with two fan blades that can be interchanged to change the direction of air flow, for example, the air can be drawn into the boat or sucked out of the boat.
The entry level solar fan runs continuously when daylight is shown on to the solar panel, the power generated runs the fan directly. When no light is available the fan will stop.
The solar fan with the rechargeable battery storage can be switch on and off as you please. It will run continuously from the solar panel when switched on and charge the battery at the same time for use when no light is available. The fan itself can be switched off at any time and the solar panel will collect and recharge the battery for power use at a later time, for example, during the night when it will run until the power is consumed. When light is available again, the battery will charge and the cycle will continue.
There is no wiring necessary for either model and the solar vent can be installed with the three fixing holes around the vent.
Stainless Steel Solar Powered Ventilator Specification
|Finish||Polished Stainless Steel||Polished Stainless Steel|
|Air Flow||900 Cu.ft/Hr (25m³)||900 Cu.ft/Hr (25m³)|
|Height Above Deck||35mm||35mm|
|Height Below Deck||37mm||37mm|