Skip to main content
WaterMota Pre-Crossflow New Style Water Pump Service Kit
WaterMota Pre-Crossflow New Style Water Pump Service Kit - Faceplate O-ring
WaterMota Pre-Crossflow New Style Water Pump Front View - Triangular Design
WaterMota Pre-Crossflow New Style Water Pump Front View - Triangular Design
WaterMota Pre-Crossflow New Style Water Pump Service Kit
WaterMota Pre-Crossflow New Style Water Pump Service Kit - Faceplate O-ring
WaterMota Pre-Crossflow New Style Water Pump Front View - Triangular Design
WaterMota Pre-Crossflow New Style Water Pump Front View - Triangular Design
WaterMota Logo

WaterMota Pre-Crossflow New Style Water Pump Service Kit

WaterMota pre-crossflow water pump impeller, gasket, and seals service kit for the new style engine water pump replacement.

WaterMota Pre-Crossflow New Style Water Pump Service Kit - Faceplate Paper Gasket

By WaterMota : W0101
Part #: W0101
Availability: Usually from stock
£59.95

WaterMota Pre-Crossflow New Style Water Pump Service Kit - Faceplate O-ring

By WaterMota : W0102
Part #: W0102
Availability: Usually from stock
£65.95

WaterMota Pre-Crossflow New Style Water Pump Service Kit

Our thoughts...

It is advisable to carry a spare water pump impeller as they can go at any time. Luckily it's a relatively easy job to replace, as long as you have a spare!

This WaterMota service kit is for the new style replacement WaterMota pre-crossflow engine water pumps. The impeller service kit includes an impeller, face plate gaskets, seals, screws, and impeller lubricant.

Which WaterMota engine is this suitable for?

The WaterMota Pre-Crossflow new style water pump service kit is suitable for WaterMota Pre-Crossflow petrol engines, including the WaterMota Sea Wolf Mk1 and WaterMota Sea Tiger Mk1 that have had a new water pump fitted.

This service kit should only be used if the engine water pump has been changed from the original pump (the original WaterMota pump has a greaser on the top) to the new style replacement water pump (which does not have a greaser on the top).

Which New Water Pump do I have?

Currently, two different new water pump designs have been available over the years, the First Generation and the Second Generation.

  • The First Generation features a 'Round' faceplate with four fixing holes and uses a Paper gasket for the faceplate seal.
  • The Second Generation has a 'Triangular' faceplate with three fixing holes and uses an O-Ring for the faceplate seal.

Our thoughts...

It is advisable to carry a spare water pump impeller as they can go at any time. Luckily it's a relatively easy job to replace, as long as you have a spare!

Specification

  W0101 W0102
Generation First Generation Second Generation
Faceplate Design Round Triangular
Faceplate Seal Design Paper Gasket O-ring
Faceplate Fixing Screw Design 4 3
Compatible with WaterMota Sea Wolf Mk1, WaterMota Sea Tiger Mk1
Engine Type Pre-Crossflow

What's Included

Please Note

This impeller kit should only be used if the engine water pump has been changed from the original pump (the original WaterMota pump has a greaser on the top) to the new style replacement water pump (which does not have a greaser on the top). The water pump shown above is the replacement pump for this engine setup (pump not included in service kit). Occasionally a slightly different water pump service kit maybe required if a different water pump is fitted. If you are unsure please contact us as these are usually available separately.

You may also like...

Explore similar items...

Explore spare parts...

Jabsco SP2701-21 Water Pump Seal Save 58%
£3.90SRP £9.30
Jabsco X4020-215A Engine Water Pump O-Ring Save 73%
£1.50SRP £5.57