Delphi Fuel Water Separators
Inline fuel water separators, also known as sedimenters or agglomerators, fit in your fuel line and separate dirt and water from your fuel before it makes its way into the fuel filter or engine.
Add to your basket...
Delphi Fuel Water Separators Information
The Delphi Fuel Water Separators also known as sedimenters or agglomerators, fit in your fuel line and separate dirt and water from your fuel before it makes its way into the fuel filter or engine. Having a water trap prior to your primary fuel filter helps prevent water from blocking the primary filter thus requiring fewer filter changes.
The water separator has a drain off plug in the bottom to empty the trapped water from the system, this should be done frequently to prevent a build-up of water. The water separator is mounted to a standard CAV type filter head with 4 port connections, 2 input ports and 2 output ports.
The engine water separator does not use a filter element and therefore only needs to be emptied frequently and cleaned as part of your routine maintenance.
Boat Safety Scheme (BSS) Metal Drain Plug
The Delphi Fuel Water Separator is available with either a plastic drain plug, which is not compliant with the Boat Safety Scheme (BSS) but can be used on boats where the regulations allow' or it is available with a metal drain plug which is compliant with the Boat Safety Scheme (BSS) and can be used on most Inland Waterways.
E10 Petrol and Water Separators
With the introduction of E10 petrol, it will be more important than ever to fit a water separator into your boats fuel line. The added Ethanol in the new E10 petrol (up to 10% renewable ethanol) will absorb more water from the atmosphere into the fuel which will travel through your fuel filter and into your engine causing poor performance, blockages and corrosion. You can read more about E10 petrol and its effects on WaterMota Petrol Engines on our blog.
Delphi Fuel Water Separators Specification
|Drain Bung Type||Plastic||Metal|
|Boat Safety Scheme (BSS) Compliant||No||Yes|
|Number of Connections||4 (2 In & 2 Out)|
|Maximum Flow Rate||45 LPH (12 US GPH)|
Included in the Delphi Fuel Water Separators
- 1 x Delphi Fuel Water Separator
- 2 x Blanking Plugs
- 1 x Plastic or Metal Drain Bung