International Toplac Plus 2.5L Marine Gloss Paint
A premium gloss marine enamel paint that is easy to apply and gives a high gloss finish. Toplac Plus replaces Toplac for 2022.
Add to your basket...
International Toplac Plus 2.5L Marine Gloss Paint Information
International Toplac Plus is a premium gloss marine enamel with UV filters, for all substrates for use above the waterline. It is easy to apply by roller without the need for tipping (laying off).
International Toplac Plus is the replacement for International Toplac for 2022. The change over started in October 2021 and Toplac will be phased out from October 2021 until February 2022.
Toplac Plus, combined with International One Up Primer Undercoat will deliver the best in class gloss finish International offer. With the One Up Primer Undercoat, there are fewer preparation coats required as One Up works as both the primer and the undercoat, on GRP or gelcoat only 2 primer coats are required and then 2-3 coats of Toplac Plus.
Toplac Plus Compared to Toplac
- Better paint flow - Easier to Use
- Improved glossiness
- Can be rollered
- No need for tipping (laying off) when using a roller
Toplac Plus Colours
The colour range is very similar to the original Toplac range, two brand new colours will be arriving in early 2022, Oyster White and Flag Blue.
Some colours have however disappeared, mainly the greens and blues such as Norfolk Green, Woodward Green, Squall Blue and Danube Blue.
Toplac Plus Sizes
Toplac Plus is available in 375ml tins, 750ml tins and 2.5L tins. There is a limited range of colours available in the 375ml and the 2.5L tins.
Thinning Toplac Plus
Toplac Plus can be thinned with up to 10% Thinners No. 100 to ease the application of the paint by a paint brush or roller.
Why is Toplac Changing to Toplac Plus?
Due to some of the chemicals used in International Toplac paint being banned for use by DIY customers, International are reformulating Toplac and changing its name to Toplac Plus.
International Toplac Plus 2.5L Marine Gloss Paint Specification
|Thinners||Thinners No. 100|
|Coverage||12m² / Litre|
|Recommended Coats||2-3 Coats|
|Drying Time (approximately)||at 15°C: 3 Hours (Touch Dry)|
|Overcoating Time (approximately)||at 15°C: 16 Hours to 3 Days|
|Application||Brush or Roller|
|Suitable Substrates||Suitable for all substrates|