The Marinco Afi 2.5 waterproof 12-volt wiper motor unit has a fully sealed powder-coated aluminium housing, adjustable self-park, twin speed motor, and adjustable sweep.
The Marinco Afi 2.5 waterproof 12-volt wiper motor unit has a fully sealed powder-coated aluminium housing, adjustable self-park, twin speed motor, and adjustable sweep designed to power a 26" windscreen wiper arm and blade.
This boat wiper motor has three pre-stripped wires for wiring in and features RF shielded circuitry. The angle of sweep is preset to 80° but this can be adjusted to 45°, 60°, or 110° and the self-park feature can be set to either left or right-sided (pre-set to the left).
The wiper motor has 5/8" (16mm) brass and stainless steel shaft with a solid brass knurled drive spindle (14mm) and the self-park has a 'coast-to-park' feature.
The Marinco 2.5 wiper motor is a larger more powerful motor than the Marinco 1.5 wiper motor and is designed to power up to a 26" wiper blade. Although the casings look the same, the Marinco 2.5 wiper motor has a larger longer and deeper body, the securing hole centres to the shaft are approximately the same however the 2.5 motor will accept a larger fixing hole.
| DF1045A | |
| Shaft Length | 2 1/2" |
| Pre-set Angle of Sweep | 80° |
| Maximum Blade Length | 26" |
| Voltage | 12v |
| Amperage | 5 amp |
| Sweep | 45, 60, 80, or 110° |
| Shaft Diameter | 5/8" (16mm) |
| Spindle Diameter | 14mm |
| Length | 202mm |
| Height | 106mm |
| Depth (excluding shaft) | 78mm |
| Shaft to Fixing Hole Centre | 165mm |
| Fixing Hole | 6mm |
