Stainless Steel quick release split jaw canopy bar clamps with handle release that provides pivoting support for additional canopy bars when fitting to a non-removable rail or bar.
These stainless steel quick release split jaw canopy (hood) bar clamps are designed to be fixed to non-removable rails or bars on board to support an additional canopy bar pivoting from the canopy bar clamp.
The opening jaw of this hood fitting allows you to place a canopy pivoting point on to a fixed handrail, push pit rail or support bar without removing the fixed rail. The jaw is held firmly together with a locating screw thread that is easily installed or removed by the toggle handle that can be loosened by hand and spread apart to 145mm. Once the split jaw clamp is in position around the desired bar simply close and tighten with the toggle handle locating screw. When tight the clamp allows you to pivot a canopy bar from the pivoting hole that features a quick release pin so bars can be removed more easily if necessary.
This is a very robust stainless steel (316) boat canopy clamp and is ideal if supporting rails cannot be removed or disassembled.
HF615A | HF615B | |
Finish | Polished Cast 316 Stainless Steel | |
Height | 20mm | 24mm |
Width | 45mm (145mm fully open) | 25mm (145mm fully open) |
Depth | 58mm | 66mm |
Canopy Bar Hole Diameter | 22mm (7/8") | 25mm |
Connecting Bar Slot Width | 6mm | |
Quick Release | Quick Release Drop Nose Pin |