Stainless Steel split jaw canopy bar clamps that provides pivoting support for additional canopy bars when fitting to a non-removable rail or bar.
These stainless steel split jaw canopy (hood) bar clamps are designed to be fixed to non-removable rails or bars on board to support an additional canopy bar pivoting from the canopy bar clamp.
The opening jaw of this hood fitting allow you to place a canopy pivoting point on to a fixed handrail, push pit rail or support bar without removing the fixed rail. The jaw is held firm together with a locating screw thread that can be loosened with an allen key and spread apart to 135mm. Once the split jaw clamp is in position around the desired bar simply close and tighten the allen key locating screw. When tight the clamp allows you to pivot a canopy bar from the pivoting hole.
This is a very robust stainless steel (316) boat canopy clamp and is ideal if supporting rails cannot be removed or disassembled.
| HF614A | HF614B | HF614C | |
| Finish | Polished Cast 316 Stainless Steel | ||
| Height | 27mm | ||
| Width | 26mm (124mm fully open) | 30mm (124mm fully open) | |
| Depth | 66mm | 68mm | |
| Canopy Bar Hole Diameter | 22mm (7/8") | 25.4mm (1") | 32mm (1 1/4") |
| Connecting Bar Slot Width | 5mm | ||
| Pin Diameter | 6mm | 8mm | |
