This 12 volt fully submersible Rule bilge pump offers a light and compact pump that is ignition protected, meeting ISO 8846, and draws very low amperage which helps to conserve batteries.
Constructed of a tough plastic body with a quick release integral strainer and long lasting stainless steel shaft all combining to create a robust and practical bilge pump.
The Rule Bilge Pump Mounting Bracket can be used if mounting to a vertical surface.
This Rule pump should not be run dry for long periods and is not suitable for pumping petrol or diesel. Specific pumps for pumping diesel are also available at Sheridan Marine.
EC310A | EC310B | EC310C | EC310D | |
Flow Rate | 360 Gallons per Hour (1363 Litres per Hour) | 500 Gallons Per Hour (1890 Litres per Hour) | 800 Gallons per Hour (3030 Litres per Hour) | 1100 Gallos per Hour (4164 Litres per Hour) |
Height | 99mm | 99mm | 96mm | 112mm |
Width | 74mm | 74mm | 61mm | 74mm |
Depth | 64mm | 64mm | 61mm | 64mm |
Voltage | 12v | 12v | 12v | 12v |
Maximum Amp Draw | 2.1amps | 1.6amps | 2.8amps | 3.7amps |
Fuse Size | 4A | 4A | 5A | 7.5A |
Port Size | 3/4" (19mm) Hose Tail or 3/4" (19mm) NPSM | 3/4" (19mm) Hose Tail or 3/4" (19mm) NPSM | 3/4" (19mm) Hose Tail | 1" (25mm) Hose Tail or 1" (25mm) NPSM or 1 1/8" (29mm) Hose Tail |
Compliance | ISO 8849 & ISO 8846 | ISO 8849 & ISO 8846 | ISO 8849 & ISO 8846 | ISO 8849 & ISO 8846 |