The Seaflo 13B Series Time Sensing Automatic Bilge Pumps are compact 12-volt automatic bilge pump which automatically checks for water every few minutes so there is no need for a float switch. The bilge pump is fully submersible so it sits directly in the bilge water. As it doesn't have a float switch or external sensor there is nothing to block or get stuck making them extremely reliable.
These automatic bilge pumps check for water every 2.5 minutes and then when it detects water it continues pumping the water from your boats bilge until there is no more resistance on the impeller.
The Seaflo bilge pumps are designed for easy installation, with simple wiring and mounting options. The strainer can be removed from the bottom of the pump and screwed to your boat, the pump can then be clicked back into position. This makes them suitable for both new installations and as replacements for existing bilge pumps.
The pump easily splits down, both the pump and strainer can be unclicked from the main body giving access to the components for cleaning and servicing. The hosetail connector also unscrews giving access to clean the one way valve.
EC326A | EC326B | |
Flow Rate | 600GPH / 2271LPH | 800GPH / 3025LPH |
Voltage | 12v | 12v |
Time Sensing | Yes | Yes |
Automatic | Yes | Yes |
Check for Water | Every 2.5 minutes | Every 2.5 minutes |
Run Time on Cycle | 0.5 seconds (continuous with water present) | 0.5 seconds (continuous with water present) |
Height | 110mm | 110mm |
Diameter | 70mm | 70mm |
Width including Hosetail Connector | 132mm | 132mm |
Amperage | 2.5amps | 2.5amps |
Maximum Head | 2.5m (7 1/2ft) | 2.5m (7 1/2ft) |
Outlet Diameter | 3/4" (19mm) / 1 1/8" (29mm) | 3/4" (19mm) / 1 1/8" (29mm) |